Guide · Labels

Printing your own labels

Every plan, the free one included, can print labels from the Portal. All you need is a label printer or a sheet of A4 stickers, and a few minutes to test them.

What you need

  • Items in a collection. You can print a label for a draft, but its page isn't public until you publish the item, so publish before you put the label up.
  • A label printer that takes 62 mm rolls, or an office printer and A4 sticker sheets with 24 labels of 70 × 37 mm.
  • A phone to test the scans.

1. Choose the items

Open Labels in the Portal. Pick the items you want, or choose a collection to print labels for all of its items; archived items are left out. To print the label of one item, open it and choose Print label.

2. Pick a label type

The type decides what's printed next to the QR code. Your plan decides which types you can use.

The same item as a QR label, a basic label and a detailed label with its scientific name. Example.
Type What it shows Plans
QR label The QR code and the item's short ID All plans
Basic label Adds the item's name, its category and its short address Plus and above
Detailed label Adds up to 6 fields you choose, and your logo when own branding is on Pro and above

On a detailed label, fewer fields keep the text large enough to read. An item without a value for a field just leaves that line out.

3. Pick a size and the number of copies

  • Label printer: one label per item, at 62 × 29 mm. It suits shelves, cases and indoor signs.
  • A4 sticker sheet: 24 labels of 70 × 37 mm per page, for any office printer. Print one test page on plain paper first and hold it over a sticker sheet against the light to check the alignment.

You can print up to 20 copies of each label, for example one for the item and a spare.

4. Preview and download

Check the preview, then download the PDF and print it at 100%, actual size. "Fit to page" shrinks the QR code and can make it harder to scan.

You can reprint any time

An item's QR code never changes, so a reprinted label works exactly like the old one. Edit the page as often as you like; you don't need new labels for it.

5. Test before you stick

Scan a few labels where they'll actually go, with an ordinary phone camera:

  • From the distance a visitor will stand, not just up close.
  • In the light the place really has, including direct sun and dim corners.
  • At an angle, if visitors will see the label from the side.

If a label is slow to scan, print it larger or move it to where people stand.

Without own branding, the middle of every QR code carries the MarkerPin symbol. With own branding, on Pro and above, it carries your logo or no logo, as you choose in Settings. Either way the code opens the same permanent address.

Indoors or outdoors

Paper labels from a label printer last well indoors. Outdoors, sun and rain fade and peel them, so use weatherproof sticker material or a laminate, or order weatherproof or engraved labels from us, with the stakes or screws to put them up. Choosing and mounting labels helps you pick.

See labels and accessories

Cookie settings

Essential cookies keep our pages working. Choose whether we may also use the others. You can change this at any time.